The PSION Organiser II Homepage
Forum Home Forum Home Help Help Search Search Members Members Login Login Register Register

Welcome, Guest. Please Login or Register.
Why register?
   The Psion Organiser II Forum
   User Forum
   General
   Post reply ( Re: New Hardware )
Post reply
Subject:
Full name:
Email:
Message icon:
Add Smileys:
Message:
Disable Smilies:

Check this if you'll be adding code (or don't like smileys).


Before submitting, please enter the verification code in the box below.
   


Topic Summary - Displaying 1 posts. Click here to show all
Posted by: MartinReid Posted on: May 3rd, 2018, 1:37pm
on May 3rd, 2018, 12:13pm, jaap wrote:

I used a slot-cover or datapack case for this. Using a sharp knife I cut off part of the flat side the datapack case and glued it in place in the hole of the comms link case.

Dear Jaap
 
Good idea, will also be a good colour match.
 
My next project is to 'make' (actually re-make) my 128k workshop datapak. I'm struggling to use 'MAKE.exe' with DOSbox via the USB link, so I'm going to have a look at Filip's Load utility and mix in some .ODB, .OB7 and .NTS files. Should be fun. I'll practice on some 32k Datapaks that Peter TheSourcerer sent me with my Top Slot Adaptor cover.
 
Sincerely Martin

The Psion Organiser II Forum » Powered by YaBB 1 Gold - SP 1.1!
YaBB 2000-2002,
Xnull. All Rights Reserved.
top