The PSION Organiser II Homepage
Forum Home Forum Home Help Help Search Search Members Members Login Login Register Register

Welcome, Guest. Please Login or Register.
Why register?
   The Psion Organiser II Forum
   User Forum
   General
(Moderator: Mikesan)
   Comms'Link DB9 and DB25 Firmware 4.2
« Previous topic | Next topic »
Pages: 1  Reply Reply Notify of replies Notify of replies Send Topic Send Topic Print Print
   Author  Topic: Comms'Link DB9 and DB25 Firmware 4.2  (Read 206 times)
olivierg
active Member




   


Posts: 39
Comms'Link DB9 and DB25 Firmware 4.2
« on: Feb 1st, 2019, 11:10pm »
Quote Quote Modify Modify

Hi,
 
Do you know if the 4.2 firmware is the same for the DB9 and DB25 version? According to the pictures on Jaap's site, the reference of the rom is the same? (I have the DB9 version).
 
Is there a way to make a 'DUMP' of the rom?
 
Thank you
Olivier
MartinReid
Mega Power Member




   
WWW

Posts: 140
Dump Comms Link ROM
« Reply #1 on: Feb 2nd, 2019, 3:42pm »
Quote Quote Modify Modify

Dear Olivier
 
Jaap has Software listed - https://www.jaapsch.net/psion/progs2.htm
 
DumpPack - CM/XP/LZ - Boris Cornet Transfer pack via Comms Link to an OPK file on PC.
When run this gives the option of Pack B: C: D: When I used it on your USB Comms Link it made a OPK on the PC, although when I loaded that OPK into Jaaps OPK Editor it had a lot of 'Failed data block header'(s). So I'm not sure how well is performed. I haven't tried it on a DB9 or DB25
 
PsiBackup - PC - Boris Cornet, Psion - A GUI shell for using the make/unmake programs from the Developer kit. - If you have access to a computer with COM1 or COM2 RS232 ports. I'm not sure if this gives the option to BackUp D:
 
Sincerely and in good faith
Martin
 
PS Olivier, I'm still impressed with your microUSB CommsLink and 256k RamPack
 
PPS..
I Found it, I knew there was another on Jaaps Site, in his My Games and Programs section
 
Sendpack CM/XP/LZ + PC Create a file on the PC with an image of the any particular pack
« Last Edit: Feb 2nd, 2019, 4:39pm by MartinReid »
olivierg
active Member




   


Posts: 39
Re: Comms'Link DB9 and DB25 Firmware 4.2
« Reply #2 on: Feb 3rd, 2019, 9:15pm »
Quote Quote Modify Modify

The problem i have only V4.2 in DB9 version, i can not compare the file.
 
If any people as the dump of Comm's link 4.2 in db25 version I am interested.
 
Thanks
Olivier
MartinReid
Mega Power Member




   
WWW

Posts: 140
Re: Comms'Link DB9 and DB25 Firmware 4.2
« Reply #3 on: Feb 4th, 2019, 11:01am »
Quote Quote Modify Modify

Dear Olivier
 
Now I get it! I have a couple of 25 pin Comms Links at home. As soon as I can I'll check the software version numbers with the technique outlined on Jaap's page then let you know.
 
Sincerely and in good faith
Martin
 
https://www.jaapsch.net/psion/models.htm
 
Update
 
I've PEEKB'd all my CommsLinks sorry no 25 pin ones with version 4.2
 
(1) 25 pin Serial CommsLink = (37) version 2.5
(2) 25 pin Serial CommsLink = (65) version 4.1
(3) (your) External powered USB Commslink = (66) version 4.2
(4) (your) USB powered USB CommsLink = (66) version 4.2
 
Sincerely
Martin
« Last Edit: Feb 4th, 2019, 6:56pm by MartinReid »
olivierg
active Member




   


Posts: 39
Re: Comms'Link DB9 and DB25 Firmware 4.2
« Reply #4 on: Feb 6th, 2019, 12:54am »
Quote Quote Modify Modify

Hi, thanks to reply,
 
i have found V4.2 in DB25, i try to dump for compare.
 
Thanks
Olivier
Pages: 1  Reply Reply Notify of replies Notify of replies Send Topic Send Topic Print Print

« Previous topic | Next topic »

The Psion Organiser II Forum » Powered by YaBB 1 Gold - SP 1.1!
YaBB 2000-2002,
Xnull. All Rights Reserved.
top