The Psion Organiser II Forum (http://forum.psion2.org/YaBB.pl)
User Forum >> User Post >> USB Comms Link Port Covers
(Message started by: MartinReid on May 3rd, 2018, 11:30am)

Title: USB Comms Link Port Covers
Post by MartinReid on May 3rd, 2018, 11:30am
For anyone who uses a 'Comms Link' or 'Power Supply' Top Slot Adaptor to enase Olivier's 'USB Powered Comms Link' the attached shows some 3D printable 'port' covers to blank the holes that remain after fitting.

TheSourcerer has Top Slot Adaptors available if needed.

The Printable STL's are too large to post here, let me know if you want make use of them.

Sincerely and in good faith
Martin



The Psion Organiser II Forum » Powered by YaBB 1 Gold - SP 1.1!
YaBB 2000-2002,
Xnull. All Rights Reserved.